WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
CONTENTS Installation Positionin Cleaning the interior Building-in instruction Electrical connection Technical specification Operation Temperature regulation Fresh food refrigeration Movable shelves Positioning the door shelves Freezing fresh food Storage of frozen food Thawing Ice-cube production Defrosting Maintenance Periodic cleaning Periods of non-operation Interior light Customer service and spare parts...
INSTALLATION If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock Important (latch) on the door or lid, be sure to make that It is essential that the appliance be connected to an spring lock unusable before you discard the old efficient earth tap.
Building-in instructions D501 Fig. 1 Door reversibility Left opening Remove pins (A) and (C) from both sides and the door. Right opening Remove the middle hinge and refit it on the opposite Remove the pins (A) and (B). side. Refit the door and pin (A) on the left side. Remove pin (D) from the right side.
Page 6
Housing dimensions Height 1225 mm Fig. 2 50-min. cm 200 Depth 550 mm Width 560 mm For appropriate venting, follow indications in Fig. 2. min. D033 Push appliance into the housing until stop strip (A) Fig. 3 touches the kitchen unit. D015 If after having carried out the previously described Fig.
Page 7
Press in the joint covers between the appliance and the kitchen unit. Fig. 6 D030 Apply covers (B) on joint cover lugs and into hinge Fig. 7 holes. D013 Position the runners (H) at the top and bottom of the Fig.
Remove the little plates and make the holes with a diam. of 2 mm. Replace the little plates over the Fig. 10 runners and screw in the screws provided (3.5x16 mm). For the alignment of the kitchen unit door, if necessary, use the clearance size of the slotted holes.
Operation Fresh food refrigeration Insert the plug into the wall socket. To obtain the best performance: Open the refrigerator door and turn the thermostat do not store warm food or evaporating liquids in the knob, clockwise, beyond the «O» (STOP) position. refrigerator;...
Movable shelves Fig. 11 The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. D040 Fig. 12 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height.
Freezing fresh food Storage of frozen food The 4-star compartment ( ) is suitable for long When first starting-up or after a period out of use, term storage of commercially frozen food and for before putting the products in the compartment let the freezing fresh food.
Defrosting Fig. 14 Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough (Fig. 14) into a special container on the back of the appliance where it evaporates.
MAINTENANCE Unplug the appliance before carrying out any maintenance operation. Periodic cleaning Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: remove the plug from the wall socket;...
Need help?
Do you have a question about the ZR 220 and is the answer not in the manual?
Questions and answers