Table of Contents
Advertisement
If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock on
the door or lid, be sure to make that spring lock
unusable before you discard the old appliance.
This will prevent it from becoming a death-trap
for a child.
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature between +18 C and +43 C (class T);
+18 C and +38 C (class ST); +16 C and +32 C (class
N); +10 C and +32 C (class SN).
The class of your appliance is shown on its rating
plate.
Make sure that there is nothing at the back, at the top
and at the bottom of the appliance to obstruct air
circulation.
For more efficient operation of the appliance the
minimum distance between the top of the appliance
and other overhanging kitchen furniture, if any,
should be at least 100 mm (Fig. 1/A).
The best solution is shown in Fig. 1/B (without
overhanging kitchen furniture).
The appliance sides may also be in contact with the
kitchen furniture, provided that air can circulate freely
round the back and top.
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Rear spacers
In the plastic envelope containing the Operating
Instructions are also included two wall spacers to be
fitted into the special openings provided on the back
of the appliance (Fig. 2).
Push-fit the spacers into the openings, making sure
that arrow (A) is positioned as per Fig. 2 and then turn
the spacers through 45 until they lock in place (arrow
in vertical position).
INSTALLATION
A
NP008
45°
D060
Fig. 1
B
Fig. 2
A
GB
17
Advertisement
Table of Contents
