Zanussi ZOB 689 S Instruction Booklet page 4

Controls
Oven function control knob (Fig. 1)
The oven function control knob can have the following
symbols and functions:
Oven Light - The oven light will be on
without any cooking function
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Top heating element - The heat comes
from the top of the oven only.
Bottom heating element - The heat comes
from the bottom of the oven only.
Inner grill element only - can be used for
grilling small quantities.
Double Grill - The full grill element will be
on.
Fan cooking - This allows you to roast or
roast and bake simoultaneously using any
shelf, without flavour transference.
Defrost Setting - This setting is intended to
assist in thawing of frozen food.
Thermostat control knob (Fig. 2)
Turn the thermostat control knob to select temperatures
between 50°C and 230°C (MAX).
Oven control light (
It will come on every time an heating element is set on
operation.
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the tempe-
rature is being maintained.
End of cooking programmer (Fig. 3)
This device allows you to make the oven switch off
automatically once the preset time is over. An acousitic
signal will be heard when the cooking is completed.The
cooking duration can be set up to 90 minutes maximum.
Place food in the oven and turn the oven function control
knob and the thermostat control knob on the required
settings. Turn the timer knob to maximum time position,
then turn it back to set the required cooking time. When
the cooking time is over, an acoustic alarm will sound
and the oven will switch off automatically.
Turn the timer knob on
operation.
Turn the the oven function and thermostat control knobs
to zero.
4
I
)
to set the oven on manual
Fig. 1
Fig. 2
Fig. 3
0