Directing The Display Output When You Turn On The Computer - Toshiba Satellite A200 Series User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 While holding down
each press, until the setting you want takes effect.
This hot key cycles through the settings in the following order:
(Sample Image) Display options window
Using external display devices
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Built-in display and TV (or other external video device)
simultaneously
TV (or other external video device) only
Built-in display and external monitor (extended desktop)
Built-in display and TV (extended desktop)
Swap-Switch primary display between internal display
and external monitor when using extended desktop
Getting Started
, press repeatedly, pausing between
Fn F5
59