Control Buttons; Disabling Or Enabling The Touchpad; Using External Display Devices - Toshiba Satellite A200 Series User Manual

58
Getting Started

Using external display devices

Control buttons

When a step instructs you to click or choose an item, move the
cursor to the item, then press and release the primary (left-hand)
button. To double-click, press the primary button twice in rapid
succession. The primary button usually corresponds to the left
mouse button.
The function of the secondary (right-hand) button depends on the
program you are using. It usually corresponds to the right mouse
button ("right-clicking"). Check your program's documentation to
determine whether it uses the right mouse button.

Disabling or enabling the TouchPad

The TouchPad
TouchPad setting, press
The other three virtual buttons have no default settings. You must
configure these buttons in the Mouse Properties dialog box before
they can be used.
Using external display devices
Your computer comes with a built-in display, but you can also
connect an external display device to an available video port, as
follows:
An external monitor or projector via the RGB (monitor) port
A TV, VCR, or DVD recorder via the S-video (TV-out) port*
*(Available on certain models)
Before connecting an external monitor or video projector, configure
your computer for the type of device you are connecting. To do this,
refer to the documentation for your operating system and devices.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the side of the computer.
2 Connect the device's power cable to a live electrical outlet.
3 Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
4 Select the settings you desire and click Apply.
5 Click OK.
™
™
is enabled by default. To change the enable/disable
+
Fn F9
. This hot key enables/disables the