Toshiba Satellite 4030CDT User Manual page 153

The Hardware Setup window contains the following tabs:
♦ Pointing Devices
The Pointing Devices tab allows you specify whether you want
to use the AccuPoint, a PS/2 mouse or both pointing devices
with your computer.
♦ Display
The Display tab lets you customize your computer's display
settings for either the internal LCD screen or for an external
monitor.
NOTE: When starting the computer in Resume mode, the last
configuration is remembered, if data does not appear on the
displayyou are using after starting in Resume mode, press Fn
+ F5.
♦ CPU Cache
Use the CPU Cache tab to enable or disable the CPU cache,
Level 2 cache and to set the Write Policy. Enabling the caches
allows much faster system performance.
♦ Boot Priority
The Boot Priority tab allows you to set the priority for booting
the computer from either the diskette drive, hard drive, or CD-
ROM drive.
♦ Keyboard
Use the Keyboard tab to set key combinations on an external
keyboard to emulate the Fn key on the computer's internal key
board. Setting an Fn key equivalent lets you use "Hot Keys" by
pressing the set combination instead of the Fn key.
♦ USB
Use the USB tab to enable or disable USB Legacy Emulation.
If your operating system does not support USB, you can still
use a USB mouse and keyboard by setting the USB Legacy
item in TSETUP to Enabled.
Toshiba Utilities
Hardware Setup
Part I: Getting To Know Your Computer