Removing A Disc With The Computer On; Removing A Disc With The Computer Off - Toshiba Satellite 1415 Series User Manual

Removing a disc with the computer on

CAUTION: Never press the eject button while the computer is
accessing the drive. Wait for the disk/disc activity light on the
system indicator panel to turn off before opening the disc tray.
1 Locate and press the eject button.
The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.
CAUTION: If the disc is spinning when you open the disc tray, wait
for the disc to stop before removing it.
4 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.

Removing a disc with the computer off

1 Insert a slender object, such as a straightened paper clip,
into the manual eject button access hole.
CAUTION: Never use a pencil to press the manual eject button.
Pencil lead can break off inside the computer and damage it.
2 Pull the tray fully open, remove the disc and place it in its
protective cover.
3 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.
Learning the Basics
Playing a CD or DVD
95