Sony ST-RDB940 Operating Instructions Manual page 27

1
?/1
DIMMER
DISPLAY
BASS BOOST
FM / AM
SPEAKERS
A
OFF B
+
A B
PHONES
S-VIDEO
MODE button
Press to select and play another video/audio source in
combination with the selected component.
Each time you press the button, the display changes as
follows:
Standard display (When 5.1CH INPUT is not selected)
t V:XXX t A:XXX t 2ND AUDIO [XXX]*
selected component T
When 5.1CH INPUT is selected
t V:XXX
5.1CH INPUT T
* STR-DB940 only.
Press MODE to display And rotate FUNCTION to select
V:XXX Any video source to enjoy with
the audio from the selected
component
A:XXX Any audio source to enjoy with
the video from the selected
component
2ND AUDIO [XXX] An audio source (except
(STR-DB940 only) PHONO) to enjoy in your sub
room. "SOURCE" selects the
same program source as the main
FUNCTION control**
** Even if 2ND AUDIO [SOURCE] is selected, no sound is output
when the receiver is set to 5.1CH INPUT. Only signals from
components connected to the analog inputs are output through
the 2ND AUDIO jacks. No signals are ouput from components
connected to only the digital inputs.
MULTI CHANNEL DECODING
PRESET CINEMA STUDIO EX.
SHIFT – + A B C
TUNING
MEMORY – + EQUALIZER
VIDEO 3 INPUT
INPUT
FM MODE
MODE
VIDEO L AUDIO R
5
A.F.D. 2 CH – MODE + ANLG DIRECT 5.1CH INPUT
SET UP LEVEL
– +
SUR
NAME EQ
ENTER
z Function indicators
Normally, the indicator above the selected function lights orange.
However, when MODE is used to select a different video (V:XXX)
or audio (A:XXX) source, the video function lights green and the
audio function lights orange. This also occurs when you select
audio components (like CD).
5 INPUT MODE button
Press to select the input mode for your digital
components (DVD/LD, TV/SAT, and MD/DAT
(STR-DB940) or MD/TAPE (STR-DB840)).
Each press switches the input mode of the currently
selected component.
Select
AUTO
DIGITAL (OPTICAL)
DIGITAL (COAXIAL)
ANALOG
2
MASTER VOLUME
DOOR OPEN FUNCTION MUTING
MODE
4 3
To
Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected
Specify the digital audio signals
input to the DIGITAL OPTICAL
input jacks
Specify the digital audio signals
input to the DIGITAL COAXIAL
input jacks (DVD/LD only)
Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks
27