Download Print this page

Installing The Cabinet - Zanussi ZV280P Instruction Booklet

Advertisement

Model
Width
Height
Depth
Energy consumption
Energy class
Rated power
Weight
Freezing capacity
Number of compressors
Set a higher temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
The power plug is not properly connected.
The fuse has blown.
The cabinet is not switched on.
Power does not reach the cabinet. (Try connecting another
electrical device to the power outlet.)
The refrigerating system will always produce some sounds. A
pulsing sound is heard when coolant is pumped inside the
cooling pipes. A ticking sound from the thermostat can be
heard when the compressor switches on and off. The sound
level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each
other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the
cabinet".
Some food products could have been placed causing the water
from running into the drain.
Do not unnecessarily open the cabinet, except when the power
outage seems to be long, in which case the food products
should be moved to another cabinet that works. In case the
frozen products are still hard following the power outage, they
may be immediately refrozen. If the food products have thawed
but still are fresh and smells alright, they may be used,
however they should be prepared before re-freezing or eating
them.
Zanussi 8181497-00/2

Advertisement

loading

This manual is also suitable for:

Zv280rZv320pZv320r