Zanussi ZHP 637 Installation & Use Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Ventilation Hood
  5. ZHP 631
  6. Installation & use manual
Zanussi ZHP 637 Installation & Use Manual

Zanussi ZHP 637 Installation & Use Manual

Hide thumbs Also See for ZHP 637:
Table of Contents

Advertisement

Quick Links

Download this manual
Cappa
Cooker hood
Hotte de cuisine
Dunstabzugshaube
Dampkap
ZHP 637
ZHP 631
MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION, USE AND MAINTENANCE HANDBOOK
MANUEL D'INSTRUCTIONS POUR L'INSTALLATION, L'EMPLOI ET L'ENTRETIEN
HANDBUCH FÜR INSTALLATION, BEDIENUNG UND WARTUNG
INSTRUCTIES VOOR MONTAGE, GEBRUIK EN ONDERHOUD

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZHP 637

Summary of Contents for Zanussi ZHP 637

  • Page 1 Cappa Cooker hood Hotte de cuisine Dunstabzugshaube Dampkap ZHP 637 ZHP 631 MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE INSTALLATION, USE AND MAINTENANCE HANDBOOK MANUEL D’INSTRUCTIONS POUR L’INSTALLATION, L’EMPLOI ET L’ENTRETIEN HANDBUCH FÜR INSTALLATION, BEDIENUNG UND WARTUNG INSTRUCTIES VOOR MONTAGE, GEBRUIK EN ONDERHOUD...
  • Page 2 Dear Customer, If you follow the recommendations contained in this Instruction Manual, your appliance will give you constant high performance and will remain efficient for many years to come.

  • Page 3: Installation

    INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
  • Page 4 Dimensions Components...

  • Page 5: Drilling The Support Surface And Fitting The Hood

    Drilling the Support surface and Fitting the Hood SCREW FITTING • The hood support surface must be 135 mm above the bottom surface of the wall units. • Drill the support with a ø 4.5 mm drill bit, using the drilling template provided. •...

  • Page 6: Recirculation Version Air Outlet

    CLOSING ELEMENT • The space between the edge of the hood and the rear wall can be closed by applying the element 20 provided, using the screws supplied for this purpose. Connections RECIRCULATION VERSION AIR OUTLET • Cut a hole ø 125 mm in the wall unit over the hood.

  • Page 7: Electrical Connection

    ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. • When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks.

  • Page 8: Grease Filters

    Grease filters CLEANING METAL SELF-SUPPORTING GREASE FILTERS • The filters must be cleaned every two months of operation, or more frequently with heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time, after disconnecting the relative fastening elements.

  • Page 9: Odour Filters (Recirculation Version)

    Odour filters (Recirculation version) REPLACING ACTIVATED CHARCOAL FILTERS • These filters are not washable and cannot be regenerated, and must be replaced approximately every four months of operation, or more frequently with heavy usage. • Remove the metal grease filters, or open the filter retaining grill.

This manual is also suitable for:

Zhp615

Table of Contents