SENDO 550 User Manual page 17

To add a contact from the main screen:
1 From the main screen, enter the area
code and phone number you wish to
store.
δ
2 Press , Options
3 Enter the name you wish to store in the
contact list, then press
keypad as explained in the Messages
section to enter the characters and to
switch between lower case, upper case,
and numeric modes.
4 Enter the chat name that you wish to
assign to the contact.
To add a speed dial number:
δ
1 Press , Contacts
screen and then select the
option.
2 Type in the first letters of the name or
scroll and find the one that you want.
3 Press and hold one of the keys
9
until the key number appears on the
left of the screen, beside the name. This
indicates that the speed dial is
successfully assigned.
ζ 1
Note: is normally reserved for
voicemail.
To remove a speed dial number:
1 Scroll to the name in the contact list.
2 Press and hold the number key already
assigned to the name, until the key
and select Save.
γ
, OK. Use the
from the main
Search
2
to
number is removed from the left of the
screen, beside the name.
Finding a contact
δ
1 Press , Contacts
screen.
Select Search
2
:
3 Use the and
contact you want.
You can Call the contact directly from here
or view the contact list options.
ζ
Note: You can check your phone
number by selecting My number from
the main menu.
Copy contacts
This option in the
to copy all the contacts that are stored on
your SIM onto your phone.
ζ
Note: This option is only available when
the default is set to phone.
Default
This option in the
to specify whether to use the names and
numbers on your phone as your default
contact list, or the names and numbers on
your SIM. Remember that you can store
up to 500 contacts on your phone!
15
from the main
and then press Select.
;
keys to find the
Contacts menu is used
Contacts menu is used
6