SENDO 550 User Manual page 10

3
Inserting the battery
Insert the battery into the phone, starting
with the right side first. Align the tabs on the
edge of the battery with the tabs on the
edge of the phone. Make sure the gold-
coloured contacts of the battery are
touching the contacts on the phone. Push
down into place.
If you need to remove the battery, press up
on the tabs on the left side of the battery and
lift out.
ζ
Note: Always turn your phone off before
you insert or remove the battery.
Charging the battery
You must charge the battery for at least 12
hours before using the phone for the first
time. After this, the battery will normally take
around 2 to 3 hours to charge.
Insert the connector on the charger lead into
the connector on the top left of the phone.
Plug the charger into a wall socket. When
charging commences, the battery icon will
change into a charger cable icon. When the
battery is fully charged, the battery icon will
reappear and you can disconnect the
charger.
Once you connect the charger, you can
switch your phone on. If the battery is
completely empty, it may take a few minutes
before you can make or receive a call once
you plug the phone into a charger.
ζ
Note: When the battery is completely
discharged it may take some time for the
battery charging icon to appear after
you have connected the charger.
8