Notes On Using The Watch - Seiko S651 Instructions Manual

NOTES ON USING THE WATCH

MODE CHANGE
When the confirmation sound is switched on, a beep sounds with each press of button A. As a
reference aid, the pitch is different when the TIME/CALENDAR mode appears.
TIME/CALENDAR SETTING
The calendar automatically adjusts for odd and even months including February of leap years from the
year 1995 up to the end of 2044.
Once the year, month and date have been set, the day of the week is automatically set.
The flashing digits except on/off of the auto illumination function, the seconds and the 12-/24-hour
indication move quickly if button D is kept pressed.
In setting the seconds, when the seconds read any number from "30" to "59" and button D is pressed,
one minute is added and the seconds are reset to "00".
Changeover between 12- and 24-hour indications is made alternately with each press of button D.
If the watch is left untouched in the TIME/CALENDAR SETTING display with the digits flashing, it will
automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.
When the hourly time signal mark is displayed, the hourly time signal rings every hour on the hour and
the confirmation sound beeps with each press of the buttons.
When all the segments light up:
If buttons C and D are pressed at the same time in the TIME/CALENDAR
SETTING display, all the segments of the display will light up as shown
at right. This is not a malfunction.
Press any of the five buttons to return to the TIME/CALENDAR mode
and then, set the time/calendar again.
15