Day And Time Setting - Seiko 6G34 Instructions Manual

DAY AND TIME SETTING

CAL. 6G34
l
Day hand
clockwise
counterclockwise
1. To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the
point the day changes (between 11:00 p.m. and 4:00 a.m.), and then advance them again until
the day hand is set to the next.
*The day hand will not move back by turning the crown counterclockwise.
2. After the day hand reaches the last day of the week, turn the crown clockwise and the hand will
return to the first day of the week (retrograde day indicator).
3. When adjusting the day hand, turn the crown slowly.
4. The 24-hour hand moves correspondingly with the hour hand.
5. When setting the hour hand, check that the 24-hour hand is correctly set.
6. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact time.
6
CROWN
Pull out to second click when Small second
hand is at the 1 o'clock position.
t
Turn clockwise to advance Hour and Minute
hands until Day hand is set to the desired day
of the week.
t
Turn to set the time.
t
Push back completely in accordance with a
time signal.
CAL. 6G27
l
clockwise
counterclockwise
1. The 24-hour hand moves correspondingly with the hour hand.
2. When setting the hour hand, check that the 24-hour hand is correctly set.
3. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact time.
CROWN
Pull out to first click when Small second hand
is at the 1 o'clock position.
t
Turn to set the time.
t
Push back completely in accordance with a
time signal.
7