Download Print this page

Precautions For Use; Names Of The Parts And Their Function; Basic Mechanism; Crown - Seiko Spring Drive 9R65 Instructions Manual

Spring drive
Hide thumbs Also See for Spring Drive 9R65:

Advertisement

■ PRECAUTIONS FOR USE

To indicate the risks of serious consequences such as severe injuries unless the following safety regulations are strictly observed.
・Immediately stop wearing the watch in following cases.
○ If the watch body or band becomes edged by corrosion etc.
○ If the pins protrude from the band
46
・Keep the watch and accessories out of the reach of babies and children.
  Care should be taken to prevent a baby or a child accidentally swallowing the
accessories.
  If a baby or child swallows the battery or accessories, immediately consult a doctor,
as it will be harmful to the health of the baby or child.
※ Immediately consult the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER.

■ NAMES OF THE PARTS AND THEIR FUNCTION

● Basic mechanism
48
※ The orientation and design of the display may vary depending on the model.
※ Some models may have screw lock type crown.
Refer to "SCREW LOCK TYPE CROWN" on page 50.
● Screw lock type crown
The watch features a screw-lock mechanism that can securely lock the crown when it is not being operated in order to prevent any operational errors.
※ It is necessary to unlock the screw lock type crown before operating it.
※ In order to prevent any operational errors from occurring, once you have finished operating the crown, make sure to relock it.
To unlock the crown
Turn the crown counterclockwise
(downward) to unscrew it. Now the
crown can be operated.
50
L
When locking the crown, turn it slowly with care, ensuring that the screw is properly engaged.
Be careful not to forcibly push it in, as doing so may damage the screw hole in the case.
● How to manually wind the mainspring by turning the crown
1.When the crown is a screw lock type, unlock it.
⇒ ● "Screw lock type crown" page 50 
2. Slowly turn the crown clockwise (upward) to wind the mainspring
with extra care not to press it in. Wind the mainspring until the power
reserve indicator shows a full-wound state. Immediately, the second
hand starts moving.
52
⇒ ● "How to read the power reserve
indicator" page 54
3. Once you finish winding the mainspring,
make sure you relock the crown when
the crown is a screw lock type.
In order to set the time and date after winding the mainspring
manually, do not relock the crown but continue the procedures.
⇒ ● "How to set the date and time" page 55
WARNING
To lock the crown
Tu r n the crow n clockw ise
(upward) while gently pressing
it in toward the watch body until it stops.
L
:Crown at the locked position
: Crown unlocked at the 0 position for
manual winding of the mainspring
:First click position for date setting
:Second click position for time setting
CAUTION
Slowly turn
the crown.
CAUTIONS
To indicate the risks of light injuries or material damages unless the following safety regulations are strictly observed.
・Avoid wearing or storing the watch in the following places.
○ Places where volatile agents (cosmetics such as polish remover, bug repellent, thinners etc.) are vaporizing
○ Places where the temperature drops below 5℃ or rises above 35℃ for a long time
○ Places of high humidity
○ Places affected by strong magnetism or static electricity
○ Dusty places             ○ Places affected by strong vibrations
・If you observe any allergic symptoms or skin irritation
Stop wearing the watch immediately and consult a specialist such as a dermatologist or an allergist.
・Other cautions
○ Do not disassemble or tamper with the watch.
○ Keep the watch out of the reach of babies and children. Extra care should be taken to avoid
risks of any injury or allergic rash or itching that may be caused when they touch the watch.

■ Crown

There are two types of crowns, a normal crown and a screw-lock crown.
Check the crown on your watch.
Turn the
The crown
crown
turns.
clockwise.
The
crown
Unlock the crown before operating it.
does not
Unscrew
turn.
※ Refer to "SCREW LOCK TYPE CROWN" on page 50.

■ HOW TO WIND THE MAINSPRING

This watch is a self-winding watch equipped with a manual winding mechanism. When the watch
is worn on the wrist, the motion of your arm automatically winds the mainspring of the watch.
※ Observe the power reserve indicator to check the amount of the remaining power.
⇒ ■ "POWER RESERVE INDICATOR" page 53
※ When first using the stopped watch, it is recommended that you manually wind the
mainspring by turning the crown.
● Guide for winding state of the mainspring
Self-winding: The mainspring of the watch is designed to be fully wound when it is
worn for twelve hours per day for three to five consecutive days.
Manual winding: Five full rotations of the crown will provide the power
to run the watch for approximately ten hours.
CAUTION
※ The watch employs a device to prevent overwinding of the mainspring. Once the mainspring is fully wound,
the mainspring slips inside, disengaging the winding mechanism. When this happens, you can still turn the
crown without damaging the watch, however, please refrain from excessive operation of the mainspring.

■ POWER RESERVE INDICATOR

The power reserve indicator lets you know the winding state of the mainspring
(the amount of the remaining power) .
Before removing the watch from your wrist,
observe the power reserve indicator to check
if the watch has stored enough power to keep
running until the next time you wear it. If
necessary, wind the mainspring. (To prevent
the watch from stopping, wind the mainspring to
store the excess power that will allow the watch
to run for extra time.)
Power reserve indicator
※ The continuous operable time of the watch may vary depending on actual use conditions, such
as the number of hours you wear the watch or the extent of your movement while wearing it.
※ In a case where you wear the watch for a short period of time each day, observe the power reserve
indicator to check the level of the remaining power. If necessary, manually wind the mainspring.
Normal crown
Pull out the crown and operate it.
Screw-lock type crown
After operating the
crown, lock it.
While pressing
the crown
Screw
47
49
51
53

Advertisement

loading