Azbox Elite User Manual page 5

(h) Operate the receiver using only the type of power source indicated
on the marking label. Unplug the receiver power cord by gripping the
power plug, not the cord.
(i) Route power supply cords so that they are not likely to be walked on
or pinched by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point
where they exit from the unit.
(j) Use an outlet that contains surge suppression or ground fault
protection. For added protection during a lightning storm, or when
the receiver is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the lines between the
receiver and the antenna. This will provide some protection against
damage caused by lightning or power line surges.
(k) Do not attempt to service the receiver yourself, as opening or
removing covers may expose you to dangerous voltage, and will void
the warranty. Refer all servicing to Authorized service personnel.
(l) Unplug the receiver from the wall outlet and refer servicing to
authorized service personnel whenever the following occurs:
- The power supply cord or plug is damaged;
- Liquid has been spilled, or objects have fallen into the receiver;
- The receiver has been exposed to rain or water;
- The receiver has been dropped or the chassis has been damaged;
- The receiver exhibits a distinct change in performance.
5