Troubleshooting - VDO CYTEC C 08 Installation And Operation Manual

17. Troubleshooting

This chart outlines possible malfunctions, their causes and solutions.
malfunction malfunction
irregular LCD readout irregular LCD readout
(i.e. after battery change) (i.e. after battery change)
speed display does not appear speed display does not appear
display fades or disappears display fades or disappears
possible cause possible cause
computer software is not running
smoothly
check for proper distance between check for proper distance between
sensor and magnet sensor and magnet
cable from sensor to computer broken cable from sensor to computer broken
computerhead is incorrectly twisted on computerhead is incorrectly twisted on
handlebar holder
no wheelsize entered no wheelsize entered
battery in computer empty battery in computer empty
temperatures below 5 C (40 F) dull temperatures below 5 C (40 F) dull
display readout display readout
solutions solutions
press AC-button at the rear of computer
head.
readjusting distance between sensor
and magnet.
check cable and replace if necessary. check cable and replace if necessary.
place computerhead on handlebar place computerhead on handlebar
holder and twist until detent (CLICK) holder and twist until detent (CLICK)
enter your wheelsize enter your wheelsize
check battery power and replace it if check battery power and replace it if
necessary. necessary.
back in normal temperatures, display
picks up working correctly.
GB
C
08
15