Advertisement
GB
C
10
WL
Programming (setting up) your wheelsize
Step 1:
Call TRP information in your display.
Step 2:
Press MODE 1 button for 5 sec. "WS1" is displayed along with an alternating flashing symbol for KMH and MPH.
Step 3:
By pressing the MODE 2 button you can choose whether you want MPH or KMH readout on your display.
Watch out:
Your choice of either MPH or KMH applies for both wheelsizes WS 1 and WS 2.
Step 4:
Once you have chosen your measuring unit, continue by pressing the MODE 1 button briefly (0.1 sec). Now, either
the default value or the wheelsize value previously entered (WS 1) is displayed with the last number flashing.
Step 5:
With buttons MODE 1 and MODE 2 you can enter wheelsize 1 previously determined. Then you enter your
measurements for wheelsize 2 (see set-up mode).
Watch out:
The computer wants you to enter your wheelsizes one at a time, first WS 1, then WS 2. You may exit setting up
wheelsizes at any time by pressing the MODE 1 button for 5 sec.
Step 6:
Once you have entered the last number for wheelsize 2, the computer automatically goes back to normal mode.
You may also exit the set-up mode at any time by pressing the MODE 1 button.
Watch out:
When you exit set-up without having completed entering your data, the computer may well work with faulty values
leading to misinformation in your display.
12
1x
WS in mm / inch
Hide quick links:
Advertisement
Need help?
Do you have a question about the C 10 WL and is the answer not in the manual?
Questions and answers