Connection - Kenwood KMM-BT34 Instruction Manual

KMM-BT34
Wiring connection (for
Microphone input jack
( 8)
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
White ]
B5
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
Green/black [
B8
KMM-302BT
/ )
Fuse (10 A)
Yellow (Battery wire)
Ignition wire (Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
Rear/subwoofer output
Antenna terminal
If no connections are made, do not let the wire
STEERING WHEEL
Light blue/yellow
REMOTE INPUT
(Steering remote
REMOTE CONT
control wire)
ANT CONT
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
ISO connectors
come out from the tab.
To the steering wheel remote control
adapter
To the power control terminal when using
the optional power amplifier, or to the
P. CONT
antenna control terminal in the vehicle.
To connect the Kenwood navigation
system, consult your navigation manual.
MUTE
ENGLISH | 17