Table of Contents
Advertisement
Light
Switches the lighting system on and off.
S1 Led
Motor running led.
S2 Led
Optimum speed led.
S3 Led
Intensive speed led.
Led
Grease filters saturated alarm led.
Led
Activated charcoal filter exhausted alarm led.
To disable this indicator (Ducted hoods) simultaneously press buttons R (using a
sharp object, for example a pencil) and V2. To enable it again, press buttons R and V3.
Reset
Internal Filter Alarms Reset button.
Motor
Switches the extractor motor on and off.
Speed
Increases the operating speed.
Speed
Increases the operating speed.
Optimum
Preset optimum speed. To customise the Optimum speed setting, select the Speed you
speed
require using buttons V2 and V3 then press V4 within 10 seconds (during this period
the corresponding led S2 will flash).
The setting you enter will remain active until the Hood is turned off.
Maximum speed, used to eliminate the highest levels of cooking vapour emission.
Intensive
Returns to Optimum speed automatically after it has been in operation for 15 minutes.
speed
Intensive speed can also be turned off manually by pressing button V4.
Delayed
This device allows any residual odours to be removed without having to wait and turn
shutdown
the appliance off, as the Motor and Lighting will switch off automatically at the end
of the selected time.
By pressing button T in succession it is possible to set the delayed shutdown of the
appliance to 15, 30 and 60 minutes, respectively. The selected time is shown by leds
T1, T2, T3. To move from one time to another, simply press button T until the
required led lights up. The time selected in this way will start from zero.
The delayed shutdown function can be turned off by pressing button V4.
Led
15' delayed shutdown indicator led.
Led
30' delayed shutdown indicator led.
Led
60' delayed shutdown indicator led.
19
Control panel
GB
Advertisement
Table of Contents
