Build-In Model; Technical Data - Zanussi ZM 24ST Instruction Manual

Z Z M M 2 2 4 4 S S T T

Build-in model

To install the appliance in a kitchen cabinet, use the
appropriate mounting frame. Note the relevant
instructions for installation and connection. When
building in to a high cabinet, you may use the lift door.
Note the relevant information for installation and
connection given in the operating instructions of the
lift door.
Warning !
Never operate the microwave oven with the lift door
closed. Such operation would damage your appliance
and invalidate the guarantee.

Technical data

Building in kit
Overall oven dimension Width
Cavity
Volume
BF246
540.5 mm
Depth 416.5 mm
Height 316 mm
Width 350 mm
Depth 351.4 mm
Height 210 mm
24 l
Connect to a plug socket with protective earth
contact and fused with a 13 A-L automatic device or
13 A slow-blowing fuse. When the oven is installed,
there must be a possibility of disconnecting it from
mains with a contact break of at least 3 mm on all
poles.
A suitable size of LS-switch, or a melting or fly-out
fuse, are suitable contact-breakers.
Power source
Fuse
Power consumption
Power Output
Weight
25
U U K K
230-240 V, 50 Hz
13 A
1550 W
900 W
18 kg