Zone Ii Remote Control Functions - Harman Kardon AVR 645 Owner's Manual

Zone II Remote Control Functions

A
E
B
C
J
F
I
H
G
J
A Power Off
B AVR Selector
C AM/FM Tuner Select
D Input Selectors
E OSD Button
F Navigation Controls
G Numeric Keys
H Disc Skip
I Volume Up/Down
J Blank Buttons
K Mute
L Clear Button
M Direct Button
14 ZONE II REMOTE CONTROL FUNCTIONS
K
J
D
Q
P
O
N
M
L
N Memory Button
O Tuner Mode Button
P Transport Controls
Q Set Button
The Bridge /DMP Selector
NOTE: The Zone II remote may be used in either
the same room where the AVR is located, or it may
be used in a separate room with an optional
infrared sensor that is connected to the AVR's
Multi IR input jack f. When it is used in the
same room as the AVR, it will control the functions
of the AVR or any compatible Harman Kardon
The Zone II remote may be used in either the
same room where the AVR is located, or it may
be used in a separate room with an optional
infrared sensor that is connected to the AVR's
Multi IR input jack .
We strongly recommend that the ZR 10 remote
be used for the initial configuration and setup
process for the AVR 645.
A Power Off: When used in the room where
the AVR is located, press this button to place the
unit in Standby. When it is used in a remote room
with a sensor that is connected to the Multi IR
jack , this button turns the Multi-Room system
off.
B AVR Selector: Press this button to turn on
the AVR. The input in use when the unit was last
on will be selected.
C AM/FM Tuner Select: Press this button to
select the Tuner as the input to the Multiroom
system. Press it again to change between the AM
and FM bands.
D Input Selectors: When the AVR is off,
press one of these buttons to turn the unit on
and to select a specific input. When the unit is
already in use, pressing one of these buttons will
change the input.
E OSD Button: Press this button to activate
the On Screen Display (OSD) system used to set
up or adjust the AVR's parameters.
F Navigation Controls: Depending on the
menu or function in use, pressing these buttons
will navigate through menus, scroll through
option lists or configuration choices, or move the
cursor position. Press the left, right, up or down
button, as appropriate to the adjustment being
made.
products in that room. When it is used in a sepa-
rate room via a sensor connected to the Multi IR
Jack f, the buttons for power, input source, vol-
ume and mute will control the source and volume
for the second zone, as connected to the Multi Out
Jacks •. (See page 49 for complete information
on using the Multiroom system.)