Audio Menu; Others Menu - JVC CA-DXT99 Instructions Manual

Compact component system
Hide thumbs Also See for CA-DXT99:
Table of Contents

Advertisement

AUDIO menu

Item
DIGITAL AUDIO OUTPUT
D. RANGE COMPRESSION
SPK. SETTING menu
Item
LEVEL
LEVEL
FRONT LEFT SPEAKER
0dB
FRONT RIGHT SPEAKER
0dB
CENTER SPEAKER
0dB
SURROUND RIGHT SPEAKER
0dB
SURROUND LEFT SPEAKER
0dB
TEST TONE
OFF
DELAY
DELAY
FRONT LEFT SPEAKER
0 ms
FRONT RIGHT SPEAKER
0 ms
CENTER SPEAKER
0 ms
SURROUND RIGHT SPEAKER
0 ms
SURROUND LEFT SPEAKER
0 ms

OTHERS menu

Item
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
37
Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).
Select this item, then press ENTER to show the LEVEL submenu for adjusting the speaker output
level.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER: Select the speaker, then adjust the output level (–6 dB to +6 dB in 1 dB steps).
TEST TONE: Turns on/off the test tone.
• Select "ALL CH ST," "MUSIC," or "MOVIE" (see page 14) to adjust the output level for all
speakers with the test tone.
Select this item, then press ENTER to show the DELAY submenu for adjusting the speaker delay time.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER: Select the speaker, then adjust the delay time (0 ms to 15 ms in 1 ms steps).
• Set one speaker to "0 ms," then set other speakers so that the sound from all speakers can reach you
at the same time.
You can select Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc tray.
OFF: Resume is deactivated.
Activate or deactivate the on-screen guide.
ON: Activate the on-screen guide.
OFF: Deactivate the on-screen guide.
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a disc in which the Registration Code is recorded, the System's
Registration Code is overwritten for copyright protection.
Contents
Contents
Contents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents