Table of Contents
Advertisement
\\ IRELESS CO'\'\E( 11\ I
r,
I
PAIRING SPEAKERS WITH THE UNIT
Note: The speakers need to be paired with the unit before any audio can be heard.
_
.
1.
Press the Power Button on the unit to turn the unit on.
2.
Press the Power Button on the speakers to turn the speakers on.
3.
Press and hold the Pair Button on the unit until the Link Indicator begins blinking.
4.
Note: The Link Indicators will flash when the unit is in Standby Mode.
5.
Press and hold the Pair Button on the speakers until the Link Indicator begins blinking.
6.
The Link Indicator will shine solid on both the unit and speaker once they are paired
together.
Transmission range: 200ft line-ol-sight, 90ft indoors (please consider these numbers
estimates, as results will vary depending on location).
Caution: The included speakers are not designedfor use outdoors. Any exposure to
precipitation may ruin the speakers.
I
LINK INDICATOR
011- The unit is powered off.
Flashing- The unit is in Standby Mode:
Blinking- The unit is attempting to pair with nearby wireless speakers.
Solid- The unit is paired with one or more nearby wireless speakers and playing.
I
USING THE WIRELESS REMOTE
The included remote is wireless and does not require line-ol-sight to control the unit.
The wireless remote can control the unit from approximately half the distance of the
speaker reception. (Approximately 100ft line-of-sight, or 45ft indoors depending on
location)
.......................
The Volume Buttons on the remote control will adjust the master volume of the unit,
affecting all linked speakers.
The included speakers have independent volume controls that can be used to fine tune the
volume ofthe individual speakers.
6
Advertisement
Table of Contents
