Cleaning The Unit; Resetting The Unit - Brookstone iDESIGN Instruction Manual

cleanInG The UnIT

• To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning .
• If the cabinet becomes dusty, wipe it with a soft, dry, dust cloth . Do not use any
wax or polish sprays on the cabinet .
• If the cabinet becomes dirty or smudged with fingerprints, it may be cleaned
carefully with a soft, damp cloth . Never use abrasive cloth or polishes as this
will mar the finish of the unit .
important: never allow any water or other liquids to get inside the unit
while cleaning.

ReseTTInG The UnIT

If the unit exhibits abnormal operation, or fails to respond to button presses,
use a pointed non-metallic object such as a pencil tip to press the RESET button
located on the back of the unit .
Disconnect the AC power from AC outlet and wait for a few seconds for the built-in
microcomputer to reset .
33