Clock Setting - Brookstone iDESIGN Instruction Manual

eQ button
Press this button to select one of the 5 preset sound equalizer settings .
They are FLAT, ROCK, CLASSIC, POP and JAZZ .
cd play mode/St-mo button
Press the CD MODE/ST-MO to select repeat function in CD mode .
Press the CD PLAY MODE/ST-MO button in Tuner mode to switch
in between stereo and mono reception .

clock seTTInG

When the unit is plugged into a wall outlet for the first time, the display will show
"00:00" or "AM 12:00" . The unit should be in Standby mode to set the current time .
1 . In Standby mode, press the PROG button on the unit or the remote control .
The hour digits "24H or 12H" will flash on the display .
2 . Press the
to 24-hour or 12-hour time format .
3 . Press the PROG button again, the hour digit will flash . Press
buttons on the unit or on the remote control repeatedly to select
the current hour .
4 . Press the PROG button again, the minute digit will flash .
Press or
5 . Press PROG button again to complete the setting of the current time .
or buttons on the unit or the remote control to change
buttons to select the current minute .
or
18