Hookup And Settings; Rear Panel; Connecting To The Aerial - LG LH-RH9500TA Owner's Manual

Hookup and Settings

a
a AC Power Cord
Plug into the power source.
b ANT.IN
Connect the aerial to this terminal.
c AUDIO IN 1 (Left/Right)
Connect the audio output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
d AUDIO OUT (Left/Right)
Connect to a TV with audio inputs.
e COMPONENT VIDEO OUT/PROGRESSIVE SCAN
(Pr Pb Y)
Connect to a TV with Pr Pb Y inputs.
f RF. OUT
Passes the signal from the AERIAL to your
TV/monitor
g OPTICAL IN Connector
Connect an optical output of Digital Device.
h SYSTEM
Connect the SPEAKER SYSTEM at the Active
Speaker.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the aerial
input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the DVD Recorder
Receiver to the aerial input jack on the TV using the 75-
ohm Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
b
c d e
f g j k
h i l
i S-VIDEO OUT (DVD OUT)
Connect to an S-Video Input on TV.
j VIDEO IN 1
Connect the video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
k VIDEO OUT
Connect to a TV with video inputs.
l VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT/
PROGRESSIVE SCAN or RGB signal of EURO AV1
AUDIO/VIDEO terminal depending on how you
connect the recorder to the TV.
m EURO AV 1 AUDIO/VIDEO
Connect to a TV with SCART jack.
n EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
o HDMI Connector (Type A)
HDMI output providing a high quality interface for
digital audio and video.
Aerial

Rear Panel

n o
m
Rear of TV
SCART INPUT
ANTENNA VIDEO
AUDIO INPUT
INPUT INPUT
L R
R
Rear of the HDD/DVD Recorder Receiver
11