Table of Contents
Advertisement
Attach the antenna cable
2
Getting started
You can configure your system several ways, depending on what additional
components (such as a VCR, DVD player, or A/V receiver) you select. For now,
however, use the simplest configuration to check your antenna and cabling.
• Ensure that the DIRECTV Receiver is not plugged into an electrical outlet.
• Attach the RG-6 coaxial antenna cable to the
the back of the DIRECTV Receiver. Refer to the appropriate figure below.
Table 1: Rear panel connections - SAT-B65A DIRECTV Receiver
1
SATELLITE IN connector
2
VHF/UHF IN connector
3
VHF (SAT)/UHF OUT connector
4
AUDIO OUTPUT (R) jack
5
AUDIO OUTPUT (L) jack
Table 2: Rear panel connections - SAT-A65A DIRECTV Receiver
1
SATELLITE IN connector
2
RF REMOTE antenna jack
3
DATA PORT
4
DIGITAL AUDIO OUTPUT optical jack
5
VHF (SAT)/UHF OUT connector
6
VHF/UHF IN connector
7
AUDIO OUTPUT (R) jack
8
AUDIO OUTPUT (R) jack
SATELLITE IN
connector on
R
6
VIDEO OUTPUT jack
7
S-VIDEO jack
8
TELEPHONE JACK
9
AC POWER CORD
R
9
AUDIO OUTPUT (L) jack
10 AUDIO OUTPUT (L) jack
11 VIDEO OUTPUT jack
12 VIDEO OUTPUT jack
13 S-VIDEO jack
14 VCR CONTROL cable jack
15 TELEPHONE JACK
16 AC POWER CORD
Advertisement
Table of Contents
