Specifications - Sony ST-RV444ES Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 120 watts
per channel minimum RMS
power, with no more than
0.05 % total harmonic
distortion from 250
milliwatts to rated output
(USA model only).
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
STR-V444ES 120 W + 120 W
STR-V333ES 110 W + 110 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
STR-V444ES 100 W + 100 W
STR-V333ES 90 W + 90 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
1)
STR-V444ES FRONT :
120 W + 120 W
1)
CENTER : 120 W
1)
REAR :
120 W + 120 W
1)
STR-V333ES FRONT :
110 W + 110 W
1)
CENTER : 110 W
1)
REAR :
110 W + 110 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
1)
STR-V444ES FRONT:
100 W + 100 W
1)
CENTER : 100 W
1)
REAR :
100 W + 100 W
1)
STR-V333ES FRONT:
90 W + 90 W
1)
CENTER : 90 W
1)
REAR :
90 W + 90 W
1) Depending on the sound field settings and
the source, there may be no sound output.
58
Frequency response
PHONO: RIAA
equalization curve
±0.5 dB
CD, TAPE, MD/DAT,
DVD/LD, TV/SAT,
VIDEO 1, 2, and
VIDEO 3:
10 Hz – 100 kHz
+0.5/–3 dB (with
sound field and
equalizer bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 2.5 mV
Impedance:
50 kilohms
2)
S/N : 86 dB
3)
(A, 2.5 mV
5.1CH INPUT, CD,
TAPE, MD/DAT,
DVD/LD, TV/SAT,
VIDEO 1, 2, and
VIDEO 3:
Sensitivity: 150 mV
Impedance:
50 kilohms
2)
S/N : 96 dB
(A, 150 mV
2) INPUT SHORT
3) Weighted network, input level
Inputs (Digital)
Outputs (Analog)
)
3)
)
Outputs (Digital)
Sampling Frequency
EQ
DVD/LD IN, CD IN
(STR-V444ES)
(Coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD/LD IN, TV/SAT
IN, CD IN, MD/
DAT IN (Optical):
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
TAPE, MD/DAT (REC
OUT); VIDEO 1, 2
(AUDIO OUT), 2ND
AV (STR-V444ES),
2ND AUDIO
(STR-V333ES):
Voltage: 150 mV,
Impedance:
1 kilohms
FRONT L/R, CENTER,
REAR L/R,
SUB WOOFER:
Voltage: 2 V
Impedance:
1 kilohms
PHONES:
Accepts low- and
high-impedance
headphones
MD/DAT (Optical)
48 kHz
BASS:
99 Hz~1.0 kHz
(21 steps)
MID:
198 Hz~10 kHz
(37 steps)
TREBLE:
1.0 kHz~10 kHz
(23 steps)
Gain levels:
±10 dB, 1 dB step