Erasing Pictures - Olympus C-315ZOOM Basic Manual

ERASING PICTURES

This function enables you to erase recorded pictures. You can choose the
single-frame erase or the all-frame erase.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
Note
• Once erased, pictures cannot be restored. Be careful not to
accidentally erase pictures you want to keep.
Single-frame erase
This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.
1
Set the power switch at
• The monitor turns on and displays the last picture taken.(Single-frame
playback)
2
Use the arrow pad to display the picture you want to
erase.
3
Press Z.
• The top menu is displayed.
4
Press to select
5
Press
• The picture is erased and the menu is closed.
All-frame erase
1
In the playback mode top menu, select MODE MENU →
CARD → CARD SETUP, and press
2
Press
3
Press
• All the pictures are erased.
.
ERASE.
to select YES, and press Z.
to select ALL ERASE, and press Z.
to select YES, and press Z.
.
En
En 33