Auger Shear Bolt Replacement - Yamaha YS624T Ower's Manual

I
,I
!I
II
11
.EJ
3
~m
(3).4=....
-
T
:~:~:~
1. Place the machine on a level sur-
face and loosen the scraper bolts
and nuts.
2. Raise or lower the scraper to ad-
just the scraper height between
the scraper edge and a level
surface.
Standard Scraper Height:
5 mm (0.2 in)
CD Scraper
(2) Scraper height
<ID Level surface
NOTE:
·
Use the standard height for
smooth concrete or asphalt
roads.
·
Increase the height for stone or
gravel roads.
3. Tighten the scraper bolts and
nuts.
NOTE:
Be sure the scraper edge is parallel
to the level surface.
-37-
6-592
AUGER SHEAR BOLT
REPLACEMENT
..
·
Be
sure
the main switch key
and spark plug lead are re-
moved or disconnected be-
fore replacement.
·
Be sure the auger and im-
peller have stopped before
replacement.
Replace the auger shear bolts when
the auger does do not rotate even
though the impeller is rotating.
1. Remove the snow caught on the
auger.
2. Remove the broken shear bolts.
.
..
3. Install the new shear bolts on the
auger and auger shaft.
NOTE:
Use the spare shear bolts in your tool
kit.
-38-