When Playing Back Pictures; Selecting A Language - Olympus Stylus 300 Digital Basic Manual

basic_e_opx_6.fm Page 15 Thursday, December 12, 2002 10:44 AM

When playing back pictures

Power on: Press
The camera turns on in the playback mode. The monitor turns
on and the last picture taken is displayed.
Power off: Press
The monitor and the camera turn off.
• Never open the card cover, remove the card or the battery, or
connect or disconnect the AC adapter while the camera is turned on.
Note
Doing so could destroy all data on the card. Destroyed data cannot
be restored. When changing the card, be sure to turn the camera off
before opening the card cover.

SELECTING A LANGUAGE

1
Open the lens barrier fully.
• The lens extends and the monitor turns on.
2
Press
• The top menu is displayed.
3
Press on the arrow pad to
select MODE MENU.
4
Press to select the SETUP tab, then press
5
Press to select
6
Press to select a language, then press
7
Press
8
Close the lens barrier to turn the camera off.
with the lens barrier closed.
.
.
, then press
again to exit the menu.
Arrow pad (
.
.
.
En 15
En
)