Maintenance Chart - Yamaha F75D Ower's Manual

EMU30560

Maintenance chart

NOTE:
Refer to the sections in this chapter for explanations of each owner-specific action.
G
The maintenance cycle on these charts assume usage of 200 hours per year. Maintenance
G
frequency should be adjusted according to usage conditions.
Disassembly or repairs may be necessary depending on the outcome of maintenance
G
checks.
Expendable or consumable parts and lubricants will lose their effectiveness over time and
G
through normal usage regardless of the warranty period.
The " " symbol indicates the check-ups which you may carry out yourself.
The " " symbol indicates work to be carried out by your Yamaha dealer.
Item
Anode(s) (external)
Anode(s) (internal)
Battery
Cooling water passag-
es
Cowling clamp
Fuel filter (can be dis-
assembled)
Fuel system
Gear oil
Greasing points
Idling speed (EFI mod-
els)
PCV (Pressure Con-
trol Valve)
Power trim and tilt unit
Propeller and cotter pin
Shift link / shift cable
Thermostat
Throttle link / throttle
cable / throttle pick-up
timing
Water pump
Actions
Inspection / replace-
ment
Inspection / replace-
ment
Inspection / charging
Cleaning
Inspection
Inspection / cleaning
Inspection
Change
Greasing
Inspection / adjustment
Inspection
Inspection
Inspection / replace-
ment
Inspection / adjustment
Inspection
Inspection / adjustment
Inspection
Initial
10 hours 50 hours
(1 month) (3 months)
Maintenance
Every
100 hours 200 hours
(6 months) (1 year)
42