Error Indicators And Warnings; Maintenance; Specifications - Sharp HT-CN400DVW Operation Manual

Error indicators and warnings

HT-CN400DVW
HT-CN500DVW
ENGLISH
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Unit display
" The disc is not loaded.
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
" The disc is scratched or dirty and cannot be recogn-
KHz
MHz
" The disc is loaded up-side down.
" The region number of the DVD is not the number on
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
TV screen
NO DISC
WRONG CODE

Maintenance

! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
E-49
Meaning
ised.
the back of the unit or "ALL".
Meaning
" The disc is not loaded.
" The disc is scratched or dirty and cannot be
recognised.
" The disc is loaded up-side down.
" The region number of the DVD is not the
number on the back of the unit or "ALL".

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
" General
Power source AC 220 - 240 V, 50/60 Hz
Power consumption HT-CN400DVW:
Power on: 88 W
Power stand-by: 0.6 W
HT-CN500DVW:
Power on: 105 W
Power stand-by: 0.6 W
Dimensions Width: 430 mm (16-7/8")
Height: 53 mm (2-1/8")
Depth: 337 mm (13-1/4")
Weight 4.2 kg (9.3 lbs.)
Audio input terminals Analogue input (IN 1): RCA type 1 pair (L/R)
Analogue input (IN 2): RCA type 1 pair (L/R)
Audio output Analogue output (OUT): RCA type 1 pair (L/R)
terminals
Video output S-video output: S-terminal 1
terminals
Video output: RCA type 1
" Amplifier (HT-CN400DVW)
Output power Front speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 30 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 50 W (10 % T.H.D., 100 Hz)
03/10/29 HTCN400_500DVW_E.fm
3
92LCN500W0270