Sharp CD-XP300H Quick Manual page 4

Listening to a cassette tape (TAPE 1 or TAPE 2)
3
4
1, 2
TAPE 1
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
2. Whilst pressing down the CLOCK button and the
EQUALIZER/X-BASS/DEMO button, press the ON/
STAND-BY button until "CLEAR AL" appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
Maintenance
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
After long use, the deck's heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser's instructions carefully before use.
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
CDXP300HE_QG
1
2
3
4
TAPE 2
4
Open the cassette door by pushing
the area marked "7 7 7 7 7 PUSH EJECT".
Load a cassette into the TAPE 1 or
TAPE 2 cassette compartment with
the side to be played facing toward
you.
Press the TAPE (1 V
lect the cassette you want to listen
to.
Press the 0 / R
back.
TAPE 1
TAPE 2
– 4 –
02.4.24, 4:34 PM
V V 2) button to se-
V V
0 / R button to start play-
0 / R 0 / R 0 / R
A Playback head
B Capstan
C Pinch roller
D Erase head
E Recording/Playback head
B
C
A
E B C
D