General Control - Sharp CD-MPX860H Operation Manual

General control

To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Display Brightness control
To dim the display brightness, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the vol-
ume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
Bass Control (X-BASS)
When the X-BASS/DEMO button is
pressed, the unit will enter the extra bass
mode. To cancel this mode, press the X-
BASS/DEMO button again.
Equaliser
When the power is first turned on, the unit will enter FLAT mode.
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
In CD/TUNER/TAPE mode
FLAT No equalisation.
ROCK For rock music.
CLASSIC For classical music.
POPS For pop music.
VOCALS Vocals are enhanced.
JAZZ For jazz.
0 .....
30 MAXIMUM
In GAME/VIDEO mode
No equalisation.
FLAT
ROCK For rock music.
CLASSIC For classical music.
ACTION For action games.
For sports games.
SPORTS
For car racing games.
RACING
CD-MPX860H
ENGLISH
E-10