Table of Contents
Advertisement
Maintenance
CD-MPX860H
ENGLISH
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
Playback head
Capstans
Pinch rollers
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser's instructions care-
fully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
E-43
B
C
A
TAPE 1
E
B
C
D
TAPE 2
Erase head
Recording/Playback head
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power
Power on: 105 W
consumption
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10 - 1/4")
Height: 330 mm (13")
Depth: 323 mm (12 - 7/8")
Weight
7.5 kg (16.5 lbs.)
* This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 8 to
cancel the demonstration mode.
Amplifier
Output power
PMPO: 860 W
MPO: 430 W (215 W + 215 W) (DIN 45 324)
RMS: 240 W (120 W + 120 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Game/Video: 1Vp-p
Hide quick links:
Advertisement
Table of Contents
