Table of Contents
Advertisement
Changing a Flat Tire
14.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
15.
Remove the center cap before
storing the flat tire.
316
For spare
For normal
tire
tire
16.
Place the flat tire face down in the
spare tire well.
17.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
18.
Secure the flat tire by screwing
the wing bolt back into its hole.
SPACER CONE
TAB
To remove the spacer cone, squeeze
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
To install the wing bolt to the spacer
cone, reverse this procedure.
Advertisement
Chapters
Table of Contents
