Physical Details; Front - Network Camera - Sitecom LN-406 Manual

Physical Details

Front - Network Camera

Lens
Microphone
Power LED
(Green)
Active LED
(Green)
Network LED
(Green)
No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality
is degraded if the lens cover is dirty or smudged.
The built-in microphone is mounted on the front.
On - Power on.
Off - No power.
Blinking - The Power LED will blink during start up. This will take
15 to 20 seconds.
Off - Camera is not capturing video.
Blinking - Camera is capturing video
Off - Wireless or LAN is not connected or camera is not
sending/receiving data.
Blinking - Data is being transmitted or received via the LAN or
Wireless connection.