Advanced Viewing Setup; Introduction; Adjusting The Video Image - Sitecom LN-406 Manual

4. Advanced Viewing Setup

Introduction

This chapter describes some additional settings and options for viewing live Video:

Adjusting the video image

Controlling user access to the live video stream
Making video available from the Internet
Using the Motion Detection feature
Adjusting the Video Image
If necessary, the Network Camera Administrator can adjust the Video image.
1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 - Web-
based Management for details.)
2. Select Administration, then Video & Audio. You will see a screen like the example
below.
3. Make the required adjustments, as explained below, and save your changes.
MPEG-4 Settings
Resolution
Video Quality
Control
Max. Frame
Rate
Select the desired video resolution format.
The default resolution is set to 320*240.
Constant Bit Rate: Select the desired bit rate. The default is set
to 1.2 Mbps.
Fixed Quality: Select the desired option. The default fix quality is
set to Normal.
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate, not
both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to
specify the desired frame rate.