Fuse Replacement - Honda GX360 Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS
FUSE REPLACEMENT
The electric starter relay circuit and battery charging circuit are
protected by a fuse. If the fuse burns out, the electric starter will not
operate.
SPECIFIED FUSE: 15A (10A charge coil type)
5A (3A charge coil type)
1. Remove the three 6
X
12 m m flange bolts, and remove the control
box.
2. Remove the 6
X
12 m m special pan screw from the control box case.
3. Remove the control box case, and inspect the fuse.
If the fuse is burnt out, remove the fuse cover, then pull out and
discard the burnt out fuse. Install
a
new specified fuse, and reinstall
the fuse cover.
pEiG-l
Never use a fuse with a rating greater than specified. Serious
damage to the electrical system or a fire could result.
4. Install the control box in the reverse order of disassembly.
CONTROL BOX CASE
6
X
12
FLANGE BOLT (3)
CONTROL BOX
6
X
12
SPECIAL PAN SCREW
51