Repeat Programmed Play; Programmed Play Operation; Auto Play - Harman Kardon HD720 Owner's Manual

To remove tracks from the middle of a
previously programmed sequence, press
the button, and then
Check @ o
press the buttons
8 h
Skip
desired track number appears in the dis-
play. Press the or
Clear e
button to remove the track from the
5
sequence.

Repeat Programmed Play

The HD720's programming system
enables you to repeat either a single
track, the entire disc or a specially
programmed passage that you select.
Repeat All
To repeat all of the tracks on a disc, press
the button
f
Repeat 1/All
button once until the
$
Repeat
and indicators light up.
REPEAT ALL
When you see these indicators, the entire
disc will play through to the end, and
then start again from the beginning. The
disc will play continually until the
button is pressed.
5 k

Programmed Play Operation

Repeat One
To repeat the track in play, press the
Repeat 1/All
until the
button
$
indicators will light and the track will
continue to play over and over again
Stop/Clear
continuously. If the track is changed by
pressing the
the Repeat function is in use, the newly
selected track will be repeated. To stop
the repeat play, press the
or press the
k
until the
REPEAT
Repeat A–B
The HD720 may be programmed to
repeat any section within a track, or a
complete passage or program that
or the
includes material in a series of tracks.
To program the unit for A–B play, first
locate the point on the disc where you
wish to begin the repeated section. At that
point, press the
. The
Stop g
REPEAT
light in the
show that the program process has start-
ed. Let the disc continue to play until you
have reached the end of the section to be
repeated. When the end point is reached,
press the
Repeat A–B
again. Note that the
indicators will now be illuminated.
Once the
Repeat A–B
pressed for the second time to complete
the programming, the HD720 will auto-
matically go to the start of the selected
passage and continue to play the section
over and over.
To resume normal play press the
button
A–B
indicators will go out, and the rest of
A–B
the disc will play normally.
14
button or the
f
Repeat
twice. The and
REPEAT ONE
buttons while
8 h
Skip
button
Stop
button
$ f
Repeat
indicator goes out.
button
Repeat A–B
and indicators will
A
to
Information Display
button
g
and
REPEAT A–B
button is
g
Repeat
again. The and
g
REPEAT

Auto Play

The HD720 may be programmed to auto-
matically go into the play mode when
the unit is turned on.
To use this feature, insert a disc in the
drawer and close the drawer as explained
on page 10. Next, locate the
switch on the rear panel. Place the
£
switch in the ON position and then either
5
turn the unit off by pressing the front
panel Power Switch 1
Statue Mode Indicator 2
or place the unit in the Standby mode by
pressing the
Power Off
remote.
When the HD720 is turned on using
either the Power Switch 1
button
Power On
automatically go into the Play mode and
the disc will play through from the first
track to the last.
To return the unit to normal operation,
put the switch
Autoplay
position.
Autoplay
until the
goes dark,
button a on the
or the
b the unit will
£ in the OFF