Specifications - Siemens Gigaset S445 User Manual

Table of Contents

Advertisement

Authorisation
Your Gigaset is intended for operation in
your country, as depicted on the under-
side of the base station and the packag-
ing. Country-specific conditions have
been taken into account. The CE mark cer-
tifies conformity of the device with the
essential requirements of the R&TTE direc-
tive.
Excerpt from the original declaration:
"We, Siemens AG, declare, that the above men-
tioned product is manufactured according to
our Full Quality Assurance System certified by
CETECOM ICT Services GmbH with ANNEX V of
the R&TTE-Directive 99/5/EC. The presumption
of conformity with the essential requirements
regarding Council Directive 99/5/EC is ensured"
Senior Approvals Manager
The Declaration of Conformity (DoC) has been
signed. In case of need, a copy of the original
DoC can be made available via the company
hotline.

Specifications

Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 650
u
Sanyo Twicell 700
u
Panasonic 700mAh "for DECT"
u
GP 700mAh
u
Yuasa Technology AAA Phone 700
u
Varta Phone Power AAA 700mAh
u
GP 850 mAh
u
Sanyo NiMH 800
u
Yuasa Technologies AAA 800
The handset is supplied with recom-
mended batteries.
Handset operating times/
charging times
Capacity
800 mAh
Standby time
approx. 150 hours (6 days)
Calling time
approx. 10 hours
Charging time
approx. 10 hours
The operating and charging times apply
only when using the recommended bat-
teries.
Base station power consumption
In standby mode: approx. 2 watts
During a call: approx. 3 watts
General specifications
DECT standard
is supported
GAP standard
is supported
No. of channels
60 duplex channels
Radio frequency
range
1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission
10 mW, average power per
power
channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base station
power supply
230 V ~/50 Hz
Environmental
+5 °C to +45 °C;
conditions for
20 % to 75 % relative
operation
humidity
Dialling mode
DTMF (tone dialling)/
DP (dial pulsing)
Base station
153 x 123 x 83 mm
dimensions
(L x W x H)
Appendix
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents