Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Siemens ET8 Series Instruction Manual

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of models and their dimensions is given on pages
2 and 3.

The control panel

Control for
# main switch
heat setting adjustment
Controls
When you touch a symbol, the respective function is activated.

The hotplates

Hotplate
$ Single-circuit hotplate
ð Dual-circuit hotplate
æ Extended cooking zone
< Halogen hotplate
< Halogen hotplate and › (boost), with power
setting
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again

Residual heat indicator

The hob has a two-stage residual heat indicator for each
hotplate.
If • appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to œ. The display remains lit until the hotplate has
cooled sufficiently.
Controls for
extended cooking zone
@ childproof lock
Controls for
0 timer activation
- and + timer adjustment
Controls for
Activating and deactivating
Touch the ð symbol
Touch the æ symbol
Note: do not look into the halogen light as the glare may dazzle the eyes
Select power setting 9, touch the + symbol again. › lights up in the display
Displays for
heat setting‚-Š
residual heat •/œ
operating readiness -
dual-circuit hotplate
' electronic boil
Notes
The settings will remain unchanged if you touch several
■
symbols at once. This allows you to wipe up spills on the
control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
'
Controls for
start control
5