Basic Settings; Changing The Basic Settings - Siemens ET6 Series Instruction Manual

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator Function
Automatic childproof lock
™‚
‹ Switched off.*
‚ Switched on.
Audible signal
™ƒ
‹ Confirmation signal and operation error signal switched off.
‚ Only operation error signal switched on.
ƒ Confirmation signal and operation error signal switched on.*
Automatic timer
™†
‹ Switched off.
‚-ŠŠ Duration after which the hotplates switch off
Duration of the timer end signal
™‡
‚ 10 seconds.*
ƒ n30 seconds
„ 1 minute.
Activation of the filament circuits
™ˆ
‹ Switched off.
‚ Switched on.
ƒ Last setting before the hotplate was switched off.*
Time for selecting the hotplate
™Š
‹ Unlimited: The last selected hotplate can always be adjusted without having to select it again.
‚ Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
Reset to basic setting
™‹
‹ Switched off.
‚ Switched on.
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the 0 symbol for
2.
4 seconds.
™‚ , appears in the right-hand display ‹.
Touch the 0 symbol repeatedly until the desired symbol
3.
appears on the left-hand display.
Set the desired value on the control panel.
4.
10
Touch the 0 symbol for 4 seconds.
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.