Connecting The Base To The Pabx; Selecting Dialling Mode And Recall; Saving An Access Code (Outside Line Code); Setting Pauses - Gigaset SL400A User Manual

Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
•
Selecting dialling mode
and recall
The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (PD).
Ï
¢ ¢
v
Telephony
s
Select dialling mode and press
Ø
§Select§
(
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABXs.
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
Ï
¢ ¢
v
Telephony
s
Select recall and
§Select§
press
Ø
( = set value). Possible values
are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
Ø
.
¢
Dialling Mode
= selected).
¢
Recall

Connecting the base to the PABX

•
Saving an access code
(outside line code)
Prerequisite: You may have to enter an
access code in front of the number for exter-
nal calls in your PABX, e.g., "0".
Ï
¢ ¢
v
Telephony
~
Enter or change access code,
max. 3 digits.
§Save§
Press the display key.
If an access code has been saved:
u
The access code is automatically prefixed
when dialling using the call lists, answer-
ing machine list and when dialling the
numbers of the SMS centres you have
entered.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick dial
numbers or SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS, you
have to delete the access code.
u
An existing access code is deleted
using Ñ.

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
¢
Access Code
§OK§
.
71