Setting Sms Centres; Receiving Sms On A Pabx - Gigaset SL400A User Manual

Setting SMS centres

SMS messages are exchanged between SMS
centres operated by service providers. You
must enter the SMS centre through which
you wish to send and receive SMS messages
into your phone. You can receive SMS mes-
sages from every SMS centre that is entered,
provided you have registered with your serv-
ice provider.
Your SMS messages are sent via the SMS
centre that is entered as the active send
service centre. However, you can activate
any other SMS centre as the active send serv-
ice centre to send a current message
¢
( page 45).
If no SMS service centre is entered, the SMS
menu only contains the entry Settings.
•
Entering/changing SMS
centres
¤
Find out about the services and special
functions offered by your service pro-
vider before you make a new applica-
tion and/or before you delete pre-config-
ured call numbers.
Ë
¢ ¢
v
Settings
s
Select SMS centre (e.g., Service
Centre 1) and press
¤
You can enter data in the following fields:
Active Send:
§Yes§
Select if SMS messages are to be sent
via the SMS centre. For the SMS centres 2
to 4, the setting only applies to the next
SMS.
SMS Service Centre no.:
Enter the number of the SMS service and
insert a star if your service provider sup-
ports personal mailboxes.
Number of e-mail access:
Enter the number of the e-mail service.
Save
Press the display key.
¢
Service Centres
§Edit§
.
Sending SMS (text messages)
Please note
Ask your service provider for details on
entering service numbers if you wish to
use personal mailboxes (prerequisite:
your service provider supports this func-
tion).
Sending an SMS via another SMS
centre
¤
Activate the SMS centre (2 to 4) as the
active send service centre.
¤
Send the SMS.
This setting only applies to the next SMS to
be sent. After that, the setting returns to
Service Centre 1.

Receiving SMS on a PABX

u
You can only receive an SMS when Call-
ing Line Identification is forwarded to
the extension of the PABX (CLIP). The
CLIP evaluation of the SMS centre
number is completed in your Gigaset.
u
Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your
sender number may be sent without your
extension number. In this case the recipi-
ent cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
45