Sharp XL-MP10H Operation Manual page 26

Recording on a cassette tape (continued)
XL-MP10H
ENGLISH
To perform programmed recording:
1 Programme tracks (see page 14).
2 Press the button.
3 Press the button, which also engages the
4 Press the button again to cancel the pause mode.
5 Press the ( ) button to start recording.
To interrupt recording:
Press the button.
To resume recording, press the
To stop recording:
Press the button.
The tape will stop.
E-19
! Recording from the radio
1
button.
2
3
button.
4
5
To stop recording:
Press the
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
! Erasing recorded tapes
1 Load the tape to be erased into the cassette compartment with
2 Press the FUNCTION button until "TAPE" appears on the dis-
3 Press the
04/11/1
Tune in to the desired station (see page 15).
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the button.
Press the button, which also
engages the button.
Press the button again to begin recording.
button.
the side to be erased facing toward you.
play.
When operating with the remote control, press the TAPE button.
button, which also engages the
erasing.
XL-MP10H(H)E2.fm
button to begin
TINSZA033SJZZ