Sharp XL-HP550E Operation Manual page 12

System connections (continued)
XL-HP550E
! Placing the speaker system
To enjoy the surround effect, we recommend that you place each
speaker as shown to the below.
Main unit
Front
speaker
(Left)
Surround
speaker
(Left)
Installation of the surround speakers:
To enjoy the perfect surround effect, mount the surround speakers
on the wall. Install them 60 cm - 90 cm (23" - 35") above the height
of your ears when you are seated.
Example:
when installed on the wall
Wall
60 - 90 cm
(23" - 35")
12
! To mount the surround speakers on the wall
The design of the sur-
round speakers allows
them to be hung on the
wall. Be sure to use the
TV
type and size of screw
that is shown to the right.
Front
speaker
(Right)
1
Make a hole in the wall using
a drill.
Surround
speaker
(Right)
2
Drive a wall mount plug into
the hole using a hammer.
Drive the wall mount plug in
until it is flush with the wall
surface.
3
Drive one screw into the wall
mount plug for each speak-
er.
Example:
when installed vertically
Drive the screws, so there is
about a 5 mm (3/16") space
between the wall and the head
of the screw.
4
Mount the surround speaker
on the wall so that the screw
head is inserted into the slot
on the surround speaker.
02/8/7
3.2 mm (1/8")
5 mm (3/16")
Min. 22 mm (7/8") 9 mm (3/8")
32 mm (1-1/4")
8-9 mm (3/8")
Wall Wall mounting
surface screw
Wall
surface
XL-HP550E(E)2.fm