Specifications - Marantz SR5007 Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Front:
Maximum effective output power:
150 W + 150 W (6 Ω, 1 kHz with 10 % T.H.D.)
Center:
150 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround:
150 W + 150 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround back:
150 W + 150 W (6 Ω, 1 kHz with 10 % T.H.D.)
Output connectors: 6 – 8 Ω
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω
P / C
B
P / C
R
5 Hz – 60 MHz — 0, –3 dB
Frequency response:
DVD
signal — 0.7 Vp-p, 75 Ω
B
signal — 0.7 Vp-p, 75 Ω
R
n Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N :
Total harmonic Distortion:
n General
Power supply:
Power consumption:
Power consumption in standby mode:
Power consumption in CEC standby
mode:
Power comsumption in network
standby mode:
For purposes of improvement, specifications and design are subject to change without notice.
155
[FM]
–15
(Note: μV at 75 Ω, 0 dBf = 1 x 10 W)
87.5 MHz – 107.9 MHz
1.2 μV (12.8 dBf)
MONO 2.8 μV (20.2 dBf)
MONO 70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
MONO 0.7 % (1 kHz)
STEREO 1.0 % (1 kHz)
AC 120 V, 60 Hz
650 W
0.2 W
0.5 W
2.7 W